Isolating transformers are assigned for supplying electric devices, if separation of electrical circuits required.
In standard design, the transformers are adjusted to fastening by means of a base welded into core or screwed angles.
If agreed, the transformers may have more tappings. The windings terminals may be placed on one side only, or on both sides of a transformer. Upon request, the transformers may be assembled in enclosures with the protection degree of IP 23, IP 44 and IP 54 with the possibility to insert supply cables through glands.

Technical data
Design - Isolating transformers are produced in accordance with requirements of EN/IEC 61558-2-4 standard
Insulation class - B(130oC) - standard up to 1,6 kVA; F(155oC) - standard above 1,6 kVA
Climatic class / environmental class - C1/E0 - land design; C2/E1 - maritime design
Ambient temperature - 40oC
Protection degree - IP 00
Protection class - I
Frequency - 50/60 Hz
Primary voltage - up to 1000 V
Secondary voltage - up to 500 V
Terminals - Screw terminals with nominal cross section from 1,5 mm2 up to 10 mm2 or cable lugs for rated current exceeding 61 A
Fastening - by means of base plate or angle