Silicone sealing 36 mm

Silicone sealing 32 mm

Calibration. M12 threaded

Hand stapler *6 in1*. 6-14 mm. RT-KGR0160

Connection module holder

Powerflow inlet guide.

Hydraulic Station Multipower 6.5ZS Honda engines

Terminal crimping tool HT-H1441. AWG 12 - 20 (4.0 - 0.5 mm²)

watertight Probe PL 33 for 1 pcs 429.00 429.00 calibrate empty mainducts <30 mm ID. It is traceable at 33 kHz frequency.

Management module with hydraulic hoses

Terminal crimping tool HT-H1440. AWG 20 - 26 (0.5 - 0.14 mm²)

Connection module - adapter 32. 40. 50 mm tubes. set

Cable floeing machine Powerflow

Hand plier to threaded rods M8+M10

Square Crimping tool with pressure adjustment axe 0.25-8mm²

Scissors for cutting cable ducts - 60mm. KTC

Pliers for trapezoidal profile fasteners. size 0-70mm

Crimping Tool - AWG -19-26(UR). 22-26(UY). 19-26(UG)

Crimping tool kit (Crimping tool 0.5-6mm². 22-10AWG. 5pcs spare dies. hex key. 2pcs replaceable screws. case)

Cutting tool for cable trunkings - 120mm. KTC120

Crimpling tool suitable for RG58. RG-59/62. BNC/TNC connectors. 0.255(6.48mm). 0.213(5.41mm). 0.068(1.73mm)

Crimping tool 0.25/0.5/0.75/1/1.5/2.5/4/6mm². 10-24 AWG

Crimpling tool - RG59/RG58/RG62/RG6; (insert for - 5.41/6.50/1.73/8.23 mm)

Cable Tie Fasten Tool HT-2082

Crimping Tool 19-26(UR) (UG) 22-26 (UY)

Crimping tool 0.5/0.75/1/1.5/2.5/4/6mm². 22-10AWG

Cable Tie Fasten Tool (2.3-9.5 mm)

Crimping tool DIN 0.25 -6 mm². AWG 10 - 24

HT-236M crimper(fame only); HT-236-6P. 236-8P. 236S 336Q. 236A.336F1. 336F2 screw driver

Crimpling tool (Ratchet type) - RG-59. RG-6. RG-62 ( insert for 6.48/8.20 mm)

Stationary bench mount wiring duct cutting tool - 125mm. VTC125

Kit contains: HT-336C crimper HT-206 cutter HT-322 stripper

Modular NippersRatchet 8P8C/RJ45

Cable Tie Fasten Tool HT-339

Crimpling tool ( Ratchet type) - LMR 400/RG8; insert for - 100*/2.54 mm. 359*/9.12 mm. 406*/10.3 mm

Mounting foam gun RPP-GUN-NC

Kit contains full cycle ratchet crimp handle with five interchangeable dies covering all the most commonly used crimp sizes for both center contacts and connector ferrules. In addition a cable cutter

Bench mount wiring ducts cutting tool with tray - 125mm. VTC125B

Crimpling tool (Ratchet type) RG-58/RG-6 (insert for 216*/5.48. 322*/8.22. 068*/1.72 mm)

Crimpling toolfor cord end terminals 10-6 AWG. (6mm²-16mm²)

Crimpling tool (Ratchet type) - RG213/RG11/RG6; (insert for 213*/2.54mm. 322*/8.20mm. 448*/11.4mm)

Ratchet Crimping Tool -DIN6/10/16mm². AWG10/8/7

Crimpling tool (Ratchet type) - RG213/RG11/RG6;( insert for - 100*/2.54 mm. 322*/8.20 mm. 476*/12.10 mm)

Crimpling tool suitable for RJ45. excluding AMP.

Crimpling tool (Ratchet type) - RG-6. RG 62;(insert for - 6.48/5.40/1.72 mm)

Ratchet Crimping Tool -DIN0.5/0.75/1.0/1.5/2.5/4 /6/10/16mm²AWG22/20/18/16/14/12/10/8/7

Modular crimping tool for EZ RJ45 plugs

Bench mounting DIN rail cutting tool. VTG-2